Chain Cleaner
Chain Cleaning Spray is a special cleaning
fluid which has been developed for
removing stubborn dirt such as grease, oil
and fuel residues or other serious
contaminants from bodywork without
damaging any other parts of two
wheelers. Chain Cleaning spray has
outstanding wetting and penetration
properties and if used according to the
instructions does not attack glass, rubber,
paint, chromium or aluminum. Chain
Cleaning Spray is thoroughly
biodegradable.
• Excellent cleaning performance
• Safe for use on chain with rubber O rings
• Protects the chain from rust and corrosion
• Enables silent and smooth movement of
chain
• Effectively removes rust and dirt from the
chain
Chain Lube
High-quality thermos table, extremely
adherent, throw-proof lubricant compound.
After the solvent has evaporated, the product
leaves an extremely adherent, soft film of
grease. Also suitable for O-ring chains.
APPLICATIONS:
Initial and maintenance lubrication of power
transmission chains. Especially suitable for
dusty, dirty and corrosive environments. Due
to extremely good adherence, especially
suitable for high-load, fast-running chains.
BENEFITS:
• Extremely good adherence.
• Throw –proof.
• Outstanding Corrosion protection.
• High load Carrying capacity.
• Cold Hot and splash water resistance.
• Excellent penetration action
• Outstanding friction and wear
reduction
• Reduce chain elongation on high
performance motorbike.
Throttle Body Cleaner
Special active solvent for cleaning typical contamination and deposits found in the intake and throttle valve areas. Dissolves and removes all smeary deposits and contaminants such as oil, resins, adhesive residues, etc. Also reliably cleans nozzles and internal components.
Applications:
Removes contamination and deposits in the intake and throttle valve area. Only suitable for use in gasoline engines. Turn the engine off, thoroughly spray the parts to be cleaned and allow the agent to take effect for 3–5 minutes. Then restart the engine and generously spray the complete area again with the engine running at medium speed. Repeat cleaning in extreme cases.
BENEFITS:
• Cleans and lubricates throttle body and carburetor
• Removes residue to increase engine performance
• Penetrates, loosens, and flushes away varnish, oil, and gum
Break Pad Cleaner
Brake Lining Cleaner has been specially
developed from synthetic and ceramic materials
which eliminate brake squeals arising between
the brake piston or contact surfaces and the
brake lining.
Applications:
Brake Lining Cleaner is suitable for the assembly,
repair and maintenance of brake systems. Used
for basic lubrication and as a preventive measure
against brake squeals. However. it also
universally suitable for numerous applications
apart from brake systems.
BENEFITS:
• Removes oil, brake fluid, grease & dirt
from metal parts
• Eliminates dust from brake & clutch parts
• Restores the friction of brake & clutch
lining material
• Leaves no residue For use on brake parts
• For use on clutch parts: clutch lining,
pressure plate
Engine Coating Spray
Quesol Engine Coating Spray is designed to resist high temperatures and provide a superior high-gloss transparent finish to engines of 2-wheelers and cars. It is non-toxic, biodegradable, and ideal for restoring rusted parts back to bare metal while offering long-term surface protection.
Applications:
Suitable for use on the engines of both 2-wheelers and cars. Before applying, ensure the engine and surrounding parts are clean, dry, and free from oil and dust. Spray the coating uniformly in thin layers and allow it to touch-dry for about 10–15 minutes before handling. Full curing takes approximately 2 hours. Avoid applying thick layers, as this may prevent proper curing and leave a sticky, rubbery feel. Sudden heating of coated engine parts may affect curing and cause an unpleasant smell.
It protects the engine surface from contamination, weathering, and rubbing effects.
Benefits
• Resists high temperature
• Non-toxic and biodegradable
• Ideal for restoring rusted parts to bare metal
• Provides a superior high-gloss transparent finish to engines
Battery Terminal Coating
Battery Terminal Coat is a special grease in
spray form which is compatible with plastics
and is formulated for the maintenance and
care of motor vehicle electronic systems,
particularly the battery terminals and
electrical connectors.
Applications:
Used especially for battery terminals,
connections and plug connectors in vehicle
electronicsystems.
BENEFITS:
• Ensures easy application and
maintenance
• Enhances battery life and zero corrosion
of terminals
• Rust and Corrosion free battery terminals
• Economical to use Zero wastages in can
• Effortless application
AC Coil Cleaner
Quesol AC Coil Cleaner is a non-acidic, non-chlorinated aerosol formulated to effectively remove deposits of scale, dirt, dust, grime, oil, and grease from air conditioner coils. Its dual-foam formula eliminates odors and requires no rinsing, while the pleasant citrus fragrance leaves the system smelling fresh. The specially designed spray valve allows usage in any direction, including upside down, ensuring easy and effective application.
Applications:
Ideal for cleaning air conditioner coils by removing accumulated dirt, grease, and contaminants that reduce cooling efficiency. The aerosol is extremely flammable and contains Toluene, Acetone, and Methanol; therefore, store in a cool place below 50°C. Avoid exposure to heat above 120°F (49°C) to prevent container bursting. Always apply in a well-ventilated area and never spray near naked flame or ignited materials. Avoid direct inhalation and eye contact.